ATEX-certified lifting systems
ATEX lifting systems represent a very specific market, and TAWI can provide you with a variety of ATEX-certified products capable of meeting needs in different classes of ATEX zones.
ATEX lifting systems
TAWI ATEX vacuum lifting systems are made of stainless steel and are grounded to ensure that static electricity cannot cause an explosion. Contact us for expert advice on your specific ATEX requirements.
- Complete solutions for ATEX zones 1 & 21 and zones 2 & 22
- ATEX-specific pumps or Venturi system
- Handling systems up to 135 kg
- ATEX-certified cranes
- High-speed lifting equipment
- Standard, fixed and flexible handles for optimum ergonomics
ATEX vacuum lifting systems
TAWI's versatile lifting tube manipulators use vacuum technology to lift and grip the load, and are designed to operate with vacuum technology to lift and grip the load, and are designed to operate with vacuum levels between 0 & 60%. The higher the vacuum level reached by the system, the more you lift. The versatile TAWII lifting tube manipulator is our most versatile vacuum lifting system, offering you optimum flexibility combined with maximum safety.
- Designed to meet the specific requirements of your ATEX zone.
- Always designed for maximum safety and ergonomics.
- Perfectly integrated to suit your workflow.
- Complete systems from a single source to make ordering simpler, faster and more efficient.
Specifications
The vacuum lifting system is available in 9 standard models with load capacities ranging from 15 to 135 kilos.
VMEx30
|
Lifting capacity |
15 kg |
|
Lifting tube diameter |
100 mm |
|
Race |
1800/2600 mm |
|
Max. lifting tube length |
2500/4000 mm |
|
Lifting speed |
0-1 m/s |
VMEx40
|
Lifting capacity |
20 kg |
|
Lifting tube diameter |
120 mm |
|
Race |
1800/2600 mm |
|
Max. lifting tube length |
2500/4000 mm |
|
Lifting speed |
0-1 m/s |
VMEx50
| Lifting capacity | 25 kg |
| Lifting tube diameter | 140 mm |
| Race | 1800/2600 mm |
| Max. lifting tube length | 2500/4000 mm |
| Lifting speed | 0-1 m/s |
VMEx60
| Lifting capacity | 30 kg |
| Lifting tube diameter | 160 mm |
| Race | 1800/2600 mm |
| Max. lifting tube length | 2500/4000 mm |
| Lifting speed | 0-1 m/s |
VMEx80
|
Lifting capacity |
40 kg |
|
Lifting tube diameter |
180 mm |
|
Race |
1800/2600 mm |
|
Max. lifting tube length |
2500/4000 mm |
|
Lifting speed |
0-1 m/s |
VMEx100
| Lifting capacity | 50 kg |
| Lifting tube diameter | 200 mm |
| Race | 1700/2400 mm |
| Max. lifting tube length | 2500/4000 mm |
| Lifting speed | 0-1 m/s |
VMEx120
|
Lifting capacity |
60 kg |
|
Lifting tube diameter |
230 mm |
|
Race |
1700/2400 mm |
|
Max. lifting tube length |
2500/4000 mm |
|
Lifting speed |
0-1 m/s |
VMEx180
|
Lifting capacity |
90 kg |
|
Lifting tube diameter |
250 mm |
|
Race |
1500 mm |
|
Max. lifting tube length |
2500 mm |
|
Lifting speed |
0-1 m/s |
VMEx270
|
Load capacity |
135 kg |
|
Lifting tube diameter |
300 mm |
|
Race |
1500 mm |
|
Max. lifting tube length |
2500 mm |
|
Lifting speed |
0-1 m/s |
Vacuum equipment certified for ATEX zones
Get maximum safety and ergonomics with stainless steel lifting systems suitable for ATEX zones.
The explosive atmosphere in the form of dust or gas around the load to be lifted, will be sucked by the pump through the tubes, filter and pump. It is important to take great care in the selection and placement of each component; and to bear in mind that every part of the equipment may be affected, even if it is not in the ATEX zone.
The placement of the vacuum pump is crucial in an ATEX environment, unlike placement in an ordinary environment.
In fact, the pump expels the air and the explosive atmosphere is sucked up by the suction cup. Placing the pump outside the ATEX zone, or in another room, may be a good option to reduce noise or save space in a limited area. However, placing the pump outside the ATEX zone does not eliminate the need for an ATEX-certified pump for the chosen zone.
The explosive atmosphere will continue to pass through the pump, so it must be protected against the risk of overheating and approved for a certain temperature.
Zones 1 and 2.1 have higher requirements than zones 2 and 2.2, so there are some differences in what we can offer.
Zone 1 and 2.1
The vacuum lifting system and its ATEX-approved tools are made of STAINLESS STEEL and are grounded via braids to ensure that no sparks resulting from static electricity can create a fire. The lifting system and accessories are therefore certified for Zones 1 & 2.1 as well as lower classification zones.
The only pump option available for Zones 1 & 2.1 is the compressed air ejector (Venturi) system. There are no moving parts in the ejector, so there's no risk of sparking or heat generation. This makes it a viable option for Zone 1 & 2.1. TAWI can also supply a variety of different jib crane solutions manufactured in stainless steel and approved for use in ATEX environments.
Zone 2 and 2.2
All equipment approved for zones 1 & 2.1 will be approved for use in ATEX zones of lower classification. Consequently, the TAWI Multifunction, accessories, compressed-air ejector and stainless-steel jibs will operate in Zones 2 & 2.2. Furthermore, in addition to the equipment mentioned above, TAWI can supply a variety of ATEX electric pumps for Zone 2 or 2.2, differentiated by GAS or POSSIERE classification.
To find the right lifting solution for your ATEX requirements, contact us today.
Need more information?
Need a quote?